Decorative LED luminaires for ceilings and walls


Glamox A70-S is made for wall and ceiling mounting or as recessed together with an accesory. A70-S has a solid-looking aluminium body and opal polycarbonate diffuser. It is available with a choice of decorative trim rings. Typical applications for Glamox A70-S would be staircases, corridors and entrance areas.

Two sizes. Three colours. 
Glamox A70-S is available in two different sizes, with a diameter of 290 or 410 mm. The aluminium body comes in a choice of white, grey or black structured paint. The outdoors version is called Glamox O70. This version has a higher IP rating, and mounting fixtures suitable for outdoors use.

Sensors and emergency lighting 
These luminaires are all available with presence detectors. The large version is available with an integrated emergency lighting unit. 

Choice of trim rings
We offer a selection of five different decorative trim rings, which are fastened to the luminaire with magnets: Chrome, copper, white, grey or black. The painted décor rings will stand out from the aluminium body. Glamox A70-S may be used without a trim ring for an even more robust-looking impact.

Technical description

Light source

LED 900 – 3500 lumen out 
Colour temperature 3000/4000 K, CRI Ra 80, MacAdams 3


Fixed output (HF) or DALI dimmable (100-1%) Driver life time up to 100.000 h/10 % (max failure) at Ta 25°C

Body material & colour

Housing in die-cast aluminium, painted in polyester powder paint in colour grey (RAL 9006), White (RAL 9016) or Black (RAL 9005). Diffuser is in impact resistant opal polycarbonate (PC).


Choice of decorative rings as accessories. 
Selection of decorative trim rings could be fastened to the luminaire with magnets: Available colours: Chrome, copper, white, grey or black. 

Without a decorative ring for an even more robust-looking impact.


5 pole push-in terminal block prepared for through wiring.

Integrated emergency light

A70-S410 can be supplied with emergency lighting system.

Integrated sensors

This product is available with a Microwave sensor type SMR-SEN with relay based ON/OFF switch or a Microwave sensor wired for Corridor function type SMC-SEN.

For more information see user manual for the respective sensor under “Download”.


A70-S is made for ceiling or wall mounting.
A70-S can also be recessed together with an recessing kit and there is a weight distribution plate for soft ceilings. Also use -R versions of decorative trim ring for recessed mounting. 

Technical gallery

Measurement drawings

a70-s290 a70-s410

Light measurement drawings

A70-S410 LED 2800 840 A70-S290 LED 1200 840

Find your version

You will now be redirected to the mobile version of Glamox websites