i80
Ta-40ta50IP66bws_markCEd-markENECLEDdaliik08-09silver_reflectormounting_ld_pendant_celing_down-2mounting_ld_receed_celing-2mounting_ld_surface_celing-2mounting_surface_wall_downwireless
logo_brand_glamox

i80

Robust and powerful industrial LED luminaire

Description

Glamox i80 is a family of IP66 industrial LED luminaires for surface and pendant mounting or in open ceilings by use of a recessing frame. Can be used in ambient temperatures (Ta) from 50°C down to -40°C. 

Efficient and Versatile
Delivers up to 30000 lumen out of the luminaire with a high CRI of 80. The product is designed to light industrial facilities, ware houses, production areas, workshops and cold storages down to Ta -40°C. Also ideal for active use in sports halls with good light and minimum glare.  With its powerful light output, i80 is well suited for use in areas with high ceiling heights and is an energy efficient replacement for discharge lamps. 

Quality materials
The luminaire housing is manufactured in die-cast aluminium with low content of iron and copper. Epoxy/polyester powder coated paint finish. The coating thickness is minimum 60 μm and i80 comply with corrosion class C4. Supplied with medium beam - (MB), narrow beam (NB) and extreme narrow beam (XNB) reflector in silver coated aluminium. Front glass in a heat soak tested tempered glass (HTG) with extra high light transmission or impact resistant clear acrylic (CL) front cover. Opal film (OP) as option.

i80 complying with corrosion class C5 can be delivered on request.

Technical description

Light source

LED 7000 - 60 000 lumen out
Colour temperature 4000 K, CRI Ra 80, MacAdams 3
On request: 3000 K

Driver

Fixed output (HF) or DALI dimmable (10-100%). 
Some variants can be dimmed down to zero (DALI-Z).

Driver life time up to 120.000 h/10 % (max failure) at Ta 25°C.

Body material & colour

Luminaire housing in die-cast aluminium with low content of iron and copper (EN AB-44100). Epoxy/polyester powder coated paint finish. Aluminium grey (RAL 9006). Reflector in silver coated aluminium. Front glass in heat soak tested tempered glass (HTG) or impact resistant clear acrylic (CL) front cover. The type of glass is extra-white and specially coated on both sides to get high light transmission. Opal film (OP) as option. Silicone free gasket. Screws made of acid proof steel.

Mounting

Ceiling or wall, on luminaire tracks, side by side in cluster, on horizontal wire or pendant. Suspension brackets have to be ordered separately.

i80 LED can also be mounted in open ceilings by use of a recessing frame.

Accessories

Kit for chain suspension (4m)
Double wire suspension kit (4m)
Bracket for horizontal wire
Ceiling bracket
Cluster bracket
Revolvable bracket
Recessing frame for open ceilings
Wieland female plug IP68
Wieland splitter plug IP68
External wireless sensor box
Ceiling bracket with wireless sensor box
Inrush current limiter

Connection

Standard i80 is supplied with pre-assembled 55 cm 3x1.5 mm² rubber cable (H07RN-F) and Wieland IP68 plug RST20i3 for fixed output and 55 cm 5x1.5 mm² rubber cable (H07RN-F) and Wieland IP68 plug RST20i5 for DALI.

A standard i80 and a through wiring (TW) variant have to be connected when mounted in cluster. The TW variant is equipped with two cables and plugs (male and female).

Optic

Medium beam - (MB), narrow beam (NB) and extreme narrow beam (XNB) reflector in silver coated aluminium. Opal film (OP).

Illustrations

Light measurement drawings

i80 LED 14000 G2 840 MB HTG i80 LED 10000  G2 840 NB i80 LED 14000 G2 840 XNB HTG i80 LED 10000 G2 840 OP HTG

Measurement drawings

i80 i80_cluster

Find your version

You will now be redirected to the mobile version of Glamox websites

www.glamox.com